FitFloor™️ CLEANING INSTRUCTIONS

FitFloor™️ flooring must not be cleaned with any petroleum-based cleaners. If any petroleum fuels are spilled on the matting, it should be removed immediately to avoid damage to the matting and voiding of warranty.   Initial Cleaning after installation
  • For glued down mats, wait 72 hours (min) after installation before proceeding with gym floor maintenance.
  • For interlocking mats, initial cleaning can be performed immediately after installation.
  Floor Finishing
  • FitFloor™️ does not require an applied finish.
  • Complete only if project requires it. A finish may alter the surface characteristic of the mat.
  • Apply floor finish for rubber flooring according to instructions and application rate recommended by manufacturer.
  Regular Maintenance
  • FitFloor™️ may be cleaned at any time using a damp mop with a PH neutral cleaner diluted with water.
  • Ensure that any moisture is immediately extracted after cleaning.
  • Regularly cleaning will help to reduce the fading of the speckle and support the retention of the floor’s original appearance.
  Precautions
  • FitFloor™️ must not be cleaned with any petroleum-based cleaners. If any petroleum product is spilled on the matting, it should be removed immediately to avoid damage to the matting and voiding of the warranty.
  Protection
  • Protect and cover new floors from damage until final inspection.
  • Provide ventilation to the installation area during installation and for minimum of 72 hours after completion of work.
 



Select your currency